2010 model KH Moment hub and Moment cranks. With CNC machined aluminum flanges this generation of Moment hubs is Kris Holm
Crank Features:
ISIS splined
Incredibly stiff with an I-beam shape that concentrates metal in high stress areas.
High tensile strength 7075 T6 Aluminum
10 mm Q-factor (outwards flare) keeps a narrow profile while maintaining adequate ankle bone clearance
Broad, flat profile is optimised for trials and street riding
CroMo pedal inserts
Lengths: 110mm, 125 mm, 137 mm, 150 mm, 165 mm
Hub Features:
2010 model KH Moment hub
ISIS splines
CNC machined 7071 aluminium
Wide flange spacing for increased wheel strength.
Flange material hardness and shape are designed to maximize spoke strength.
Sealed, 42 mm bearings with standard 100 mm spacing
36 hole hub
Flange width-Centre flange to centre flange- 75mm, Flange diameter- 65.5 mm
Note this crankset is compatible with frames designed to accept 42mm bearings, but will also work with frames with 40mm non-machined bearing holders. You may need longer bearing holder bolts in this case.
Note photo shows the older model KH Moment hub. A 2010 hub comes with this crankset.
all was excellent. guy on the ph was very helpful order arrived earlier than expected and my son is riding around as I type...will recommend. Many thanks folks Garymore...
New Zealand |
Home |
Learn to Ride |
Unicycle Buyer's Guide |
Whats New |
Ordering |
About Us |
Contact Us: 0800 UNICYCLE (864 292) |
