New Zealand | Home | Learn to Ride | Unicycle Buyer's Guide | Whats New | Ordering | About Us | Contact Us: 0800 UNICYCLE (864 292) | fb

Park Tool Dual Crank Extractor

A crank extractor that will fit both square taper and ISIS cranks. Built to last.

This tool is a compact crank puller with a built-in 8mm hex for removing crank bolts. Includes two rotating tips (11.3mm and 16.3mm) so it can be used to remove splined ISIS Drive® crank arms, as well as square-holed crank arms. Weighs 168g.

Park Tool part number: CWP-7                   

Park Tool is the most well known and trusted manufacturer of cycle tools in the world. Their tools have been made in Minnesota USA since 1963 with one aim: to build the best tools possible.

To remove your cranks simply remove the dust cap (if any) then undo the crank bolt. If you have ISIS cranks attach the larger diameter tip to the extractor, or for square taper cranks use the smaller diameter tip. Next screw the threaded outer barrel of the Crank Extractor into the matching thread on the crank. Keep turning it until it stops. Then screw in the inner barrel of the extractor. As you turn the inner barrel the foot pushes on the end of the axle and pulls the crank off. You'll need to use an adjustable wrench or adjustable spanner for this part of the crank removal.

Specifications

Shipping Weight
0.20kg
In Stock
Yes
Price
$45.95
 

Happy Customers

My unicycle arrived in good time considering it was Christmas... This is the second unicycle I've ordered from you and both times I've had good service. It was helpful being able to track my unicycle on the PBT website. Another nice thing was that the courier fees were so small. Thanks for being such a recommendable service! Michael P more...

Comments

Park Tool Dual Crank Extractor
Click Image to Enlarge